سافت استارتر اشنایدر الکتریک مدل Schneider ATS22C21Q

Altistart 22

Soft starter

Asynchronous motors

Pumps and fans

ATS22- ATS22C21Q

3 phases

230…440 V – 15…10 %

110 kW 400 V
110 kW 440 V
55 kW 230 V

195 A

117 W for standard applications

AC-53A

Start with torque control (current limited to 3.5 In)

210 A for connection in the motor supply line for standard applications

IP00

With heat sink

Internal bypass

195…484 V

50…60 Hz – 10…10 %

45…66 Hz

To the motor delta terminals
In the motor supply line

230 V – 15…10 % 50/60 Hz

20 W

2

Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

100 mA at 12 V DC (relay outputs)

5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs

3

(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

24 V <= 30 V

Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

0.4…1 Icl adjustable

750 Ohm

Modbus

1 RJ45

Serial

RS485 multidrop

4800, 9600 or 19200 bps

Phase failure: line
Thermal protection: motor
Thermal protection: starter

CE

Forced convection

425 mm

206 mm

299 mm

33 kg

55…100 kW at 200…240 V 3 phases
110…220 kW at 380…440 V 3 phases

Soft starter

Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5

EN/IEC 60947-4-2

CCC
UL
GOST
CSA
C-Tick

1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6

15 gn for 11 ms conforming to EN/IEC 60068-2-27

56 dB

Level 2 conforming to IEC 60664-1

0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

-10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)

-25…70 °C

<= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m